전기용품 및 생활용품 안전관리법 제15조(안전확인대상제품의 신고 등)
Electrical Appliances and Consumer Products Safety Control Act, Article 15 (Reporting of Products Subject to Safety Verification)
① 안전확인대상제품의 제조업자 또는 수입업자는 안전확인대상제품에 대하여 모델별로 안전확인시험기관으로부터 산업통상부령으로 정하는 바에 따라 안전확인시험을 받아, 해당 안전확인대상제품이 제4항에 따른 안전기준에 적합한 것임을 확인한 후 그 사실을 산업통상부장관에게 신고하여야 한다. <개정 2022.10.18, 2025.10.1>
(1) A manufacturer or importer of products subject to safety verification shall, for each model, undergo a safety verification test by a safety verification testing institution as prescribed by Ordinance of the Ministry of Industry and Trade, and after confirming that the products subject to safety verification conform to the safety standards under paragraph (4), shall report that fact to the Minister of Industry and Trade.
② 안전확인대상제품의 제조업자 또는 수입업자는 제1항에 따른 안전확인의 신고(이하 "안전확인신고"라 한다)사항을 변경하려는 경우에는 산업통상부령으로 정하는 바에 따라 산업통상부장관에게 변경신고를 하여야 한다. 다만, 제품의 안전성과 관련이 없는 것으로서 산업통상부령으로 정하는 사항을 변경하는 경우에는 그러하지 아니하다. <개정 2025.10.1>
(2) A manufacturer or importer of products subject to safety verification who intends to change a matter reported as safety verification under paragraph (1) (hereinafter referred to as a "safety verification report") shall file a report of change with the Minister of Industry and Trade, as prescribed by Ordinance of the Ministry of Industry and Trade. However, this does not apply where a matter prescribed by Ordinance of the Ministry of Industry and Trade as unrelated to product safety is changed.
③ 산업통상부장관은 제1항 또는 제2항 본문에 따른 신고 또는 변경신고를 받은 경우 그 내용을 검토하여 이 법에 적합하면 신고를 수리하여야 한다. <신설 2022.10.18, 2025.10.1>
(3) Upon receiving a report or report of change under paragraph (1) or the main clause of paragraph (2), the Minister of Industry and Trade shall review its content and, if it conforms to this Act, shall accept the report.
④ 안전확인시험기관은 산업통상부장관이 정하여 고시하는 안전확인대상제품에 관한 안전기준을 적용하여 안전확인시험을 실시하여야 한다. 다만, 안전기준이 고시되지 아니하거나 고시된 안전기준을 적용할 수 없는 경우의 안전확인대상제품에 대해서는 산업통상부령으로 정하는 바에 따라 안전확인시험을 실시할 수 있다. <개정 2022.10.18, 2025.10.1>
(4) A safety verification testing institution shall conduct safety verification tests by applying the safety standards for products subject to safety verification determined and notified by the Minister of Industry and Trade. However, for products subject to safety verification for which safety standards have not been notified or the notified safety standards cannot be applied, safety verification tests may be conducted as prescribed by Ordinance of the Ministry of Industry and Trade.
⑤ 안전확인대상제품의 제조업자 또는 수입업자는 제1항 또는 제2항 본문에 따른 신고 또는 변경신고를 한 경우에는 산업통상부령으로 정하는 바에 따라 해당 안전확인대상제품이 제4항에 따른 안전기준에 적합하다는 사실을 증명하는 서류를 갖추어 두어야 한다. <개정 2022.10.18, 2025.10.1>
(5) A manufacturer or importer of products subject to safety verification who has filed a report or report of change under paragraph (1) or the main clause of paragraph (2) shall keep documents proving that the products subject to safety verification conform to the safety standards under paragraph (4), as prescribed by Ordinance of the Ministry of Industry and Trade.
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2025.10.1 · 법률 · 산업통상부 소관