고압가스 안전관리법 제10조(공급자의 의무 등)
High-Pressure Gas Safety Control Act, Article 10 (Obligations of Suppliers, etc.)
① 제4조제1항ㆍ제2항에 따라 고압가스의 제조허가를 받거나 제조신고를 한 자(이하 "고압가스제조자"라 한다) 또는 같은 조 제5항에 따라 고압가스의 판매허가를 받은 자(이하 "고압가스판매자"라 한다)가 고압가스를 수요자에게 공급할 때에는 그 수요자의 시설에 대하여 안전점검을 하여야 하며, 산업통상부령으로 정하는 바에 따라 수요자에게 위해 예방에 필요한 사항을 계도하여야 한다. <개정 2008.2.29, 2009.5.21, 2013.3.23, 2018.3.20, 2025.10.1>
(1) When a person who has obtained a manufacturing permit or made a manufacturing report for high-pressure gas under Article 4 (1) and (2) (hereinafter referred to as a "high-pressure gas manufacturer"), or a person who has obtained a sales permit for high-pressure gas under paragraph (5) of the same Article (hereinafter referred to as a "high-pressure gas seller"), supplies high-pressure gas to a consumer, the person shall conduct a safety inspection of the consumer's facilities and guide the consumer on matters necessary for hazard prevention, as prescribed by Ordinance of the Ministry of Industry and Trade.
② 고압가스제조자나 고압가스판매자는 제1항에 따른 안전점검을 한 결과 수요자의 시설 중 개선되어야 할 사항이 있다고 판단되면 그 수요자에게 그 시설을 개선하도록 하여야 한다.
(2) Where a high-pressure gas manufacturer or high-pressure gas seller determines, as a result of the safety inspection under paragraph (1), that there are matters in the consumer's facilities that need improvement, the manufacturer or seller shall have the consumer improve the facilities.
③ 고압가스제조자나 고압가스판매자는 고압가스의 수요자가 그 시설을 개선하지 아니하면 그 수요자에 대한 고압가스의 공급을 중지하고 지체 없이 그 사실을 시장ㆍ군수 또는 구청장에게 신고하여야 한다.
(3) Where a consumer of high-pressure gas does not improve the facilities, a high-pressure gas manufacturer or high-pressure gas seller shall suspend the supply of high-pressure gas to that consumer and report the fact to the mayor, head of a Gun, or head of a Gu without delay.
④ 제3항에 따라 신고를 받은 시장ㆍ군수 또는 구청장은 고압가스의 수요자에게 그 시설의 개선을 명하여야 한다.
(4) The mayor, head of a Gun, or head of a Gu who receives a report pursuant to paragraph (3) shall order the consumer of high-pressure gas to improve the facilities.
⑤ 제1항에 따른 안전점검에 필요한 점검자의 자격ㆍ인원, 점검장비, 점검기준 등은 산업통상부령으로 정한다. <개정 2008.2.29, 2013.3.23, 2025.10.1>
(5) The qualifications and number of inspectors, inspection equipment, and inspection standards, etc. necessary for the safety inspection under paragraph (1) shall be prescribed by Ordinance of the Ministry of Industry and Trade.
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2026.3.10 · 법률 · 산업통상부 소관