전기용품 및 생활용품 안전관리법 제6조(안전인증의 면제)
Electrical Appliances and Consumer Products Safety Control Act, Article 6 (Exemption from Safety Certification)
산업통상부장관은 안전인증대상제품이 다음 각 호의 어느 하나에 해당하는 경우에는 제5조제1항에도 불구하고 대통령령으로 정하는 바에 따라 안전인증의 전부 또는 일부를 면제할 수 있다. <개정 2025.10.1>
Where a product subject to safety certification falls under any of the following, the Minister of Industry and Trade may exempt all or part of the safety certification, as prescribed by Presidential Decree, notwithstanding Article 5 (1):
1. 연구ㆍ개발, 전시 및 안전인증을 위한 제품시험을 목적으로 제조하거나 수입하는 안전인증대상제품으로서 대통령령으로 정하는 것에 대하여 산업통상부령으로 정하는 바에 따라 산업통상부장관의 확인을 받은 경우
1. Where a product subject to safety certification, manufactured or imported for the purposes of research and development, exhibition, and product testing for safety certification and prescribed by Presidential Decree, has been confirmed by the Minister of Industry and Trade, as prescribed by Ordinance of the Ministry of Industry and Trade;
2. 수출을 목적으로 수입하는 안전인증대상제품으로서 대통령령으로 정하는 것에 대하여 해당 특별시ㆍ광역시ㆍ특별자치시ㆍ도 또는 특별자치도(이하 "시ㆍ도"라 한다)의 조례로 정하는 바에 따라 특별시장ㆍ광역시장ㆍ특별자치시장ㆍ도지사 또는 특별자치도지사(이하 "시ㆍ도지사"라 한다)의 확인을 받은 경우
2. Where a product subject to safety certification, imported for the purpose of export and prescribed by Presidential Decree, has been confirmed by the Mayor of a Special Metropolitan City, Metropolitan City, or Special Self-Governing City, the Governor of a Do, or the Governor of a Special Self-Governing Province (hereinafter referred to as a "Mayor/Do Governor"), as prescribed by ordinance of the relevant Special Metropolitan City, Metropolitan City, Special Self-Governing City, Do, or Special Self-Governing Province (hereinafter referred to as a "Si/Do");
3. 수출을 목적으로 안전인증대상제품을 제조하는 경우
3. Where products subject to safety certification are manufactured for the purpose of export;
4. 국가 간 상호인정협정에 따라 산업통상부장관이 정하여 고시하는 외국의 안전인증기관에서 안전인증을 받은 경우
4. Where safety certification has been obtained from a foreign safety certification body notified by the Minister of Industry and Trade under a mutual recognition agreement between countries;
5. 제4조제3항에 따라 안전인증기관이 인정계약을 체결한 국내외의 기관에서 제품시험 또는 공장심사를 받아 안전인증기관이 적합한 것임을 확인한 경우
5. Where product testing or a factory audit has been conducted at a domestic or foreign institution with which a safety certification body has entered into a recognition agreement under Article 4 (3), and the safety certification body has confirmed conformity;
6. 산업통상부령으로 정하는 일정 수준 이상의 시험능력을 갖춘 제조업자 또는 수입업자가 산업통상부령으로 정하는 바에 따라 제품시험을 실시하여 안전인증기관이 적합한 것임을 확인한 경우
6. Where a manufacturer or importer with testing capability at or above a certain level prescribed by Ordinance of the Ministry of Industry and Trade has conducted product testing as prescribed by Ordinance of the Ministry of Industry and Trade and the safety certification body has confirmed conformity;
7. 산업통상부령으로 정하는 바에 따라 안전성이 확인된 안전인증대상제품을 병행수입하는 경우
7. Where products subject to safety certification whose safety has been confirmed, as prescribed by Ordinance of the Ministry of Industry and Trade, are parallel imported;
8. 산업통상부령으로 정하는 바에 따라 안전인증대상제품을 일회성으로 수입하거나 생산하는 경우
8. Where products subject to safety certification are imported or produced on a one-time basis, as prescribed by Ordinance of the Ministry of Industry and Trade;
9. 그 밖에 다른 법령에 따라 안전성이 인정되는 경우로서 산업통상부령으로 정하는 경우
9. Other cases prescribed by Ordinance of the Ministry of Industry and Trade in which safety is recognized under other statutes.
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2025.10.1 · 법률 · 산업통상부 소관