자동차관리법 제35조의7(내압용기의 장착검사 등)
Motor Vehicle Management Act, Article 35-7 (Installation Inspection, etc. of Pressure Containers)
① 자동차제작자등은 제35조의6제1항에 따라 내압용기검사를 받은 내압용기를 자동차에 장착하려면 자동차자기인증을 하기 전에 내압용기와 그 연결에 필요한 가스설비에 대하여 성능시험대행자로부터 장착의 안전성에 대한 검사(이하 "내압용기장착검사"라 한다)를 받아야 한다. 다만, 액화석유가스를 연료로 사용하는 자동차의 경우에는 내압용기검사를 받은 내압용기를 자동차에 장착하여 자동차자기인증을 함으로써 내압용기장착검사를 갈음한다.
(1) A motor vehicle manufacturer, etc. that intends to install in a motor vehicle a pressure container that has undergone a pressure container inspection under Article 35-6 (1) shall, before carrying out motor vehicle self-certification, have the pressure container and the gas equipment needed for its connection undergo an inspection of the safety of the installation by a performance test agency (hereinafter referred to as a "pressure container installation inspection"). However, for motor vehicles using liquefied petroleum gas as fuel, installing a pressure container that has undergone a pressure container inspection in the motor vehicle and carrying out motor vehicle self-certification replaces the pressure container installation inspection.
② 성능시험대행자는 내압용기장착검사를 실시하여 내압용기장착검사기준에 적합하면 국토교통부령으로 정하는 내압용기장착검사증을 발급하여야 한다. <개정 2013.3.23>
(2) A performance test agency shall conduct the pressure container installation inspection and, if the installation meets the pressure container installation inspection standards, issue a pressure container installation inspection certificate prescribed by Ordinance of the Ministry of Land, Infrastructure and Transport.
③ 내압용기장착검사의 기준과 방법, 절차, 그 밖에 필요한 사항은 국토교통부령으로 정한다. <개정 2013.3.23>
(3) The standards, methods and procedures for pressure container installation inspections and other necessary matters shall be prescribed by Ordinance of the Ministry of Land, Infrastructure and Transport.
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2026.10.2 · 법률 · 국토교통부 소관