송유관 안전관리법 제5조(완성검사 등)
Oil Pipeline Safety Management Act, Article 5 (Completion Inspection)
① 송유관설치자가 해당 송유관의 공사를 완성하였을 때에는 산업통상부장관의 완성검사를 받아야 한다. <개정 2013.3.23, 2025.10.1>
(1) Where an oil pipeline installer has completed construction of the oil pipeline, the installer shall undergo a completion inspection by the Minister of Industry and Trade.
② 제1항에 따른 완성검사의 기준은 다음 각 호와 같다.
(2) The standards for the completion inspection under paragraph (1) are as follows:
1. 해당 공사가 제3조제1항 본문에 따른 인가를 받은 공사계획(제3조제3항 본문에 따른 변경인가를 받은 경우에는 그 변경인가를 받은 공사계획을 포함한다)에 부합되는지의 여부
1. Whether the construction conforms to the construction plan approved under the main clause of Article 3 (1) (including the construction plan for which approval of a change was obtained under the main clause of Article 3 (3)); and
2. 기술기준에 맞게 완성되었는지의 여부
2. Whether the construction was completed in conformity with the technical standards.
③ 송유관설치자는 인가받은 공사계획에 따라 송유관의 일부가 완성되었을 때에는 산업통상부장관의 사용검사를 받아 이를 사용할 수 있다. <개정 2013.3.23, 2025.10.1>
(3) Where part of an oil pipeline has been completed in accordance with the approved construction plan, the oil pipeline installer may undergo a use inspection by the Minister of Industry and Trade and use that part.
④ 제3항에 따른 검사의 기준은 제2항을 준용한다.
(4) Paragraph (2) applies mutatis mutandis to the standards for the inspection under paragraph (3).
⑤ 송유관설치자는 제1항에 따른 완성검사 또는 제3항에 따른 사용검사에 합격한 후가 아니면 송유관을 사용하여서는 아니 된다.
(5) An oil pipeline installer shall not use an oil pipeline until after passing the completion inspection under paragraph (1) or the use inspection under paragraph (3).
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2026.3.10 · 법률 · 산업통상부 소관